
Incoloy 800HT
Product Detail
Product Tags
Incoloy 800HT provides outstanding resistance to carburization, oxidation and nitridation conditions. They are not susceptible to embrittlement even after prolong operations up to 1200oF to 1600oF. At this temperature range, many stainless steels exhibit brittleness.
Incoloy 800 HT Trade Name: Alloy800HT; UNS N08811;W.Nr 1.4854
Incoloy 800HTChemical composition:
Alloy |
% |
Ni |
Cr |
Fe |
C |
Mn |
Si |
Cu |
S |
Al |
Ti |
P |
Incoloy 800H |
Min. |
30 |
19 |
balance |
0.05 |
0.15 |
0.15 |
|||||
Max. |
35 |
23 |
0.10 |
1.5 |
1 |
0.75 |
0.015 |
0.60 |
0.60 |
0.03 |
Incoloy 800HT Physical properties
Density |
8.0 g/cm³ |
Melting point |
1350-1400 ℃ |
Incoloy 800HT Minimum mechanical properties in the room temperature
Status |
Tensile strength |
Yield strength |
Elongation |
Solution treatment |
450 |
180 |
35 |
Incoloy 800HT Specification:
Bar | Pipe | Sheet | Strip | Wire | Fitting |
ASTM B 408 & ASME SB 408 ASTM B 564 & ASME SB 564 ASME Code Case 1325 ASME Code Case 1949 ISO 9723, 9724, 9725, VdTÜV 412 & 434, DIN 17460 EN 10095 |
ASTM B 163, ASME SB 163 ASTM B 407/B 829, ASME SB 407/SB 829, ASTM B 514/B 775, ASME SB 514/SB 775, ASTM B 515/B 751, ASME SB 515/SB 751, 1325 and 1983, BS 3074NA15, SEW 470, VdTÜV 412 & 434 ISO 6207, DIN 17459 |
ASTM B409, AMS 5877, BS 3072NA15, BS 3073NA15, VdTüV 412 & 434, DIN 17460, EN 10028-7, EN 10095 | ASTM B 409/B 906, ASME SB 409/SB 906, ASME Code Case 1325, 2339 BS 3072NA15 BS 3073NA15 SEW 470, VdTÜV 412 & 434, DIN 17460, EN 10028-7 & EN 10095 |
ASTM B408, AMS 5766, ISO 9723, ISO 9724, BS 3076NA15, BS 3075NA15, EN 10095, VdTüV 412 & 434, AWS A5.11 ENiCrFe-2, AWS A5.14 ERNiCr-3 | ASTM B366 |
Incoloy 800HT Application fields:
1.Nitrate condenser—Corrosion resistance of Nitric acid
2.Steam heating pipes–Very good mechanical properties
3.Heat up element tube–Very good mechanical properties
4.For the application of up to 500℃ environment, alloy state supplies change to annealing.