Inconel X-750 Round Bar/Flat Bar/Rod/Hex Bar/Square Bar
Product Detail
Product Tags
Inconel X-750 Round Bar/Flat Bar/Rod/Hex Bar/Square Bar
Inconel X-750 is a precipitation-hardenable alloy which has been used in applications such as high temperature structural members for gas turbines, jet engine parts, nuclear power plant applications, heat-treating fixtures, forming tools, and extrusion dies. The alloy is highly resistant to chemical corrosion and oxidation and has high stress-rupture strength and low creep rates under high stresses at temperatures up to 1500°F (816°C) after suitable heat treatment.
Inconel X-750 Trade Name: Alloy X750;UNSN07750;W.Nr.2.4669.
Inconel X-750 Bar Chemical composition:
|
Alloy |
% |
Ni |
Cr |
Fe |
Nb |
Co |
C |
Mn |
Si |
S |
Cu |
Al |
Ti |
P |
|
X-750 |
Min. |
Balance |
14 |
5.0 |
0.7 |
0.4 |
2.25 |
|||||||
|
Max. |
17 |
9.0 |
1.2 |
1.00 |
0.08 |
1.00 |
0.5 |
0.01 |
0.5 |
1.0 |
2.75 |
0.02 |
Inconel X-750 Bar Physical properties:
|
Density |
8.25 g/cm3 |
|
Melting range |
1395-1445℃ |
Inconel X-750 Bar minimum Mechanical properties in normal temperature:
|
Alloy |
Tensile strength Rm N/mm² |
Yield strength RP0.2 N/mm² |
Elongation A5 % |
Brinell hardness HB |
|
Solution treatment |
910 |
550 |
25 |
≤350 |
Incone X750 Specification:
| Rod | Wire | Strip | Sheet |
| ASTM B 637, ASME SB 637, ISO 9723, ISO 9724, ISO 9725, AMS 5667, AMS 5668, AMS 5669, AMS 5670, AMS 5671, AMS 5747, EN10269 | BS HR 505, AMS 5698, AMS 5699 | ISO 6208, AMS 5542, AMS 5598 | ISO 6208, AMS 5542, AMS 5598 |
Inconel X-750 Applications:
1.Fasteners, Springs, Automotive parts
2.Nnuclear engineering, heat processing industry
3.Oil distillation towers, industrial gas turbines
4.Pressure vessels, aircraft and aerospace engineering, rocket engines
5.Extrusion dies, bolts, seals and rotors
