Monel K500 Round Bar/Nickel-Copper Alloy 500
Product Detail
Product Tags
Monel K500 Round Bar/ Nickel-Copper Alloy 500
Monel K500 is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistancecharacteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging.
Monel K500 Trade Name:Werkstoff Nr.2.4375; Nickel-Copper Alloy 500; UNS N05500;
Monel K500 Round Bar Chemical Compositons:
| Alloy | % | Ni | Cu | Al | Ti | C | Mn | Fe | S | Si |
| K500 | Min | 63.0 | 27.0 |
2.30 | 0.35 | / | / | / | / | / |
| Max | / | 33.0 | 3.15 | 0.85 | 0.25 | 1.5 | 2.0 | 0.01 | 0.50 |
Monel K500 Round Bar Physical properties:
|
Density |
8.44 g/cm³ |
|
Melting point |
1315℃-1350℃ |
Monel K500 Bar minimum mechanical properties in the room temperature:
|
Status |
Tensile strength Rm N/mm² |
Yield strength Rp0.2 N/mm² |
Elongation A5% |
Brinell hardness HB |
|
Solution treatment |
480 |
250 |
15 |
≤300 |
Monel K500 Specification:
| Rod | Wire | Sheet | Strip | Pipe | Fittings |
|
BS3076NA18, DIN 17752, DIN 17754, QQ-N-286,ISO 9725 SAE AMS 4676, ISO 9723,ISO9724 |
ASTM B164/ QQ-N-281, BS3075NA18/ ASTM B 865/ DIN 17753/ASME Code Case1192/AMS 4730 AWS.514/VdTUV 263 ERNiCu-7/AMS4731/AWS A5.11 /AMS 4675/ENiCu-7/AMS 4675, VdTUV 263 |
BS3072NA1, QQ-N-286, ISO 6208, ASTM B127, AMS544 |
BS3073NA18, DIN 17750, BS3072NA1, BS 3073NA13, QQ-N-281 |
ASTM B165/ASTM B163 ASTM B829/ASTM 775, ASTM B725/ASTM B163 ASTM B730/ASTM B751 AMS 4574/DIN 17752, VdTUV 2635 |
ASTM B366 |
Monel K500 Bar Application Fileds:
-
Pump shafts, Tools and systems for handling oil production, medical blades, propeller shafts, pumps, valves, springs,chemical processing units, centrifugal pumps, impellers, offshore drilling systems.
-
Typical applications for Monel alloy K-500 products are chains and cables, fasteners and springs for marine service
-
Pump and valve components for chemical processing
-
Doctor blades and scrapers for pulp processing in paper production;
-
Oil well drill collars and instruments, pump shafts and impellers,non-magnetic housings, safety lifts and valves for oil and gas production;
-
Sensors and other electronic components.
