Nitronic 60
Product Detail
Product Tags
Nitronic 60 Stainless Steel provides a significantly lower cost way to fight galling and wear compared with cobalt-bearing and high nickel alloys. Its uniform corrosion resistance is better than type 304 in most media. In Nitronic 60 chloride pitting is superior to Type 316.Yield strength at room temperature is nearly twice that of 304 and 316.Nitronic 60 provides excellent high temperature oxidation resistance and low-temperature impact resistance.
Nitronic 60 Trade Name: Alloy 218;UNS S21800
Nitronic 60 Chemical composition:
|
Alloy |
% |
Ni |
Cr |
Fe |
C |
Mn |
Si |
N |
P |
S |
|
Nitronic 60 |
Min. |
8.0 |
16.0 |
59.0 |
7.0 |
3.5 |
0.08 |
|||
|
Max. |
9.0 |
18.0 |
66.0 |
0.1 |
9.0 |
4.5 |
0.18 |
0.04 |
0.03 |
Nitronic 60 Physical properties:
|
Density |
8.0 g/cm3 |
|
Melting point |
1360℃-1375 ℃ |
Nitronic 60 mechanical properties in the room temperature:
|
Alloy Status |
Tensile strength |
Yield strength RP0.2 N/mm² |
Elongation |
|
Solution Treatment |
600 |
320 |
35 |
Nitronic 60 Specificaiton:
| Rod | Wire | Froging | Pipe | Sheet | Strip |
|
AMS 5848,ASME SA 193,ASME SA 479,ASTM A276 |
|||||
Nitronic 60 Applications Fileds:
Used extensively in the Power, Chemical, Petrochemical, Food and Oil & Gas industries with an array of uses including expansion joint wear plates, pump wear rings, bushings, process valve stems, seals and logging equipment.
